Scott Network Router r x 400wl User Guide

rx 400wl  
Wi-Fi Internet / Ethernet/ FM PLL Radio  
Instruction Manual  
 
TABLE OF CONTENTS  
PRECAUTIONS……………………………………………………………………  
TABLE OF CONTENTS…………………………………………………………..  
1
2
BOX CONTENTS……..…………………………………………………………… 2  
FEATURES…….…………………………………………………………………... 2  
LOCATION OF CONTROLS……………………………………………………... 3  
PREREQUISITES FOR INTERNET RADIO……………………………………  
5
CONNECTIONS…………………………………………………………………… 5  
INSTALLING BATTERIES……………………...……………….……………….. 6  
BASIC OPERATIONS……………………………….……………………………. 7  
FM RADIO OPERATION……….………………………………………………… 9  
INTERNET RADIO OPERATION…………….…………………….………….… 10  
USB DEVICE AND SD/MMC CARD OPERATION……………………….…… 12  
AUX IN FUNCTION……………………………………………………………….. 12  
RECORD FUNCTION…………………………………………………………….. 13  
MEDIA SERVER……………….………………………………………………….. 13  
MAINTENANCE…………………………………………………………………… 14  
TROUBLE SHOOTING GUIDE………………………………………………….. 15  
TECHNICAL SPECIFICATIONS………………………………………………… 16  
BOX CONTENTS  
1. Main unit  
4. AUX IN cable  
2. AC/DC adapter  
3. Remote control with battery  
5. Interchangeable inlays (x3)  
6. Instruction manual  
FEATURES  
This unit let you enjoy thousands of Internet radio stations as well as your  
favorite local FM stations, with following features:  
Access your web radio even when your PC is off. vTuner live internet radio  
service provides more than 5000 radios worldwide and more than 10000  
regularly updated podcasts.  
Enjoy music recorded on a PC connected to your network.  
Connect the unit to your Internet network wirelessly (Wi-Fi) or with a cable  
(Ethernet).  
Five preset stations for each web radio station and local FM radio station.  
With your Internet radio, you can record (for private use only) web radio and  
FM radio broadcasts on a USB device or SD/MMC card.  
Play files on a USB device or SD/MMC card and copy files from your USB  
device to your SD/MMC card and vice-versa.  
Using the AUX IN jack, you can connect an external audio device to your  
radio and use it as a docking station.  
Clock and alarm functions (wake-up at selectable source, snooze function).  
Stylish, flexible design with interchangeable inlays in different colors.  
Firmware can easily be upgraded via the Internet.  
Note: Due to continuous improvements, the features may be subject to change without  
notice. You should upgrade the firmware regularly by browsing through the menus:  
Main menu Æ Settings Æ System Æ Upgrade. Please download the latest update  
of the instruction manual at http://www.awox.com/scott.  
GB- 2  
 
LOCATION OF CONTROLS  
Unit back view  
1. Bass reflex hole  
2. FM antenna  
3. Time back up battery  
cover  
4. Ethernet jack  
5. DC IN 12V jack  
1
2
3
4
5
1
Unit front view  
1. Speakers  
10  
1 2 3 4 5 6 7 8 9  
11 1  
2.  
ALARM OFF button  
3. ( ) ON/STANDBY button  
4. Preset P1 button  
5. Preset/Previous  
P2/ button  
6. Preset/Play/Pause  
P3/  
button  
7. LCD display  
8. Preset/Next  
P4/ button  
9. Preset/Stop  
P5/ button  
10. VOLUME + button  
11. VOLUME - button  
12. Interchangeable inlay  
13. SD/MMC card slot  
21 20 19 18 17 16 15 14 13 12  
14. RECORD  
button  
15. USB port  
16. Repeat/Shuffle  
/
button  
17. SCROLL/SELECT/SNOOZE knob  
18. BACK button  
19. Headphones jack  
20. AUX IN jack  
21. IR (Infra-red) remote control sensor  
GB- 3  
 
Remote control  
7
8
1. ( ) ON/STANDBY button  
2. BACK button  
9
1
2
3
4
3. DOWN  
button  
4. Preset P1 button  
5. Repeat/Shuffle  
6. Preset/Previous P2/  
7. SNOOZE button  
10  
11  
12  
/
button  
button  
8.  
ALARM OFF button  
9. VOLUME +/- buttons  
10. SELECT button  
11. UP button  
5
6
13  
14  
12. Preset/Play/Pause P3/  
button  
13. Preset/Stop P5/ button  
15  
14. Preset/Next P4/  
button  
button  
15. RECORD  
LCD display  
1
2
1. The heading of the menu  
2. Connection status (Wi-Fi or Wired)  
3. Navigation  
4. Volume  
6
5. Clock time  
6. The content of the menu  
3
5
4
Meaning of LCD icons  
Reminders  
Connection (Top right)  
Volume  
WiFi connection  
Wired connection  
Shuffle  
Repeat one  
Navigation  
Repeat folder  
Stereo  
Previous / Next Level  
Previous / Next It em  
Misc. Information  
Action in progress  
Items  
Fol d er  
Fi l e  
Progress Bar  
Tuning  
Rad io  
Play  
Pause  
Stop  
Tr ack  
Fav o r i t e s  
Record  
Audio Format  
WAV  
Options  
MP3  
Select / Enable  
WMA  
Deselect / Disable  
GB- 4  
 
PREREQUISITES FOR INTERNET RADIO  
First of all, you will need a broadband Internet connection and a wireless access  
point (Wi-Fi) connected to the broadband Internet via a router and a modem  
(cable/DSL). You can choose between a wired connection (Ethernet) and a  
wireless connection (Wi-Fi).  
CONNECTIONS  
Note: In order to avoid any malfunctions, do not turn on the unit before making  
any connections.  
Wired connection (Ethernet)  
Connect the unit to the broadband Internet using an  
RJ45 Ethernet cable (not supplied) via the router  
and broadband modem (cable/DSL) as illustrated.  
Follow your router’s instruction manual to ensure a  
proper Internet connection.  
RJ45 ETHERNET  
CABLE (NOT  
SUPPLIED)  
MODEM  
ROUTER  
If you do not have a router, you should connect the  
unit directly to the modem.  
INTERNET  
DATA PORT  
Wi-Fi connection  
Use a router (not supplied) to connect the wireless  
access point (Wi-Fi) to the broadband Internet as  
illustrated. Should you have problems with the  
Internet connection setup, contact your networking  
device supplier and/ or Internet service provider.  
Note: The unit should work anywhere within a range  
of at least 15 metres around the wireless access point.  
However, the connection will depend on your router  
performance and environmental factors such as the  
number/ thickness of the walls, doors or windows.  
MODEM  
ROUTER  
INTERNET  
DATA PORT  
Configurations  
If your wireless network is protected by Wired Equivalent Privacy (WEP) or Wi-  
Fi Protected Access (WPA) data encryption, you need to know the WEP or  
WPA code in order to connect the unit to the network.  
If your wireless network is configured to accept trusted  
stations only, you need to enter the unit MAC address into  
your wireless access point. The unit MAC address can be  
located by browsing through the menu: Main menu Æ  
Settings Æ System Æ Connection Æ Status Æ Configuration.  
To enter the unit MAC address into your wireless access point, you must read  
the instructions supplied with the wireless access point.  
For more details on configurations, refer to the “INTERNET RADIO  
OPERATION” section.  
GB- 5  
 
Connecting the power supply  
Insert the AC/DC adapter plug into an AC mains outlet with a 230V AC ~ 50Hz  
power source, and the other end to the DC IN 12V jack at the back of the unit.  
Connecting an external audio device (e.g. MP3 player)  
Connect the line out or headphones jack on an external audio device (such as a  
MP3 player) to the unit’s AUX IN jack with the AUX IN cable (supplied).  
Connecting headphones  
Plug the headphones (not supplied) into the unit’s headphones jack for private  
listening. The speaker output will be shut off automatically.  
INSTALLING BATTERIES  
Installing the remote control battery  
1. Remove the battery compartment cover on the bottom of the remote control,  
by pressing the left tab to the right whilst removing the cover.  
2. Insert a 3V lithium battery (CR2025 or equivalent) with polarity (+) matching  
the mark on the bottom of the remote control.  
3. Replace the battery compartment cover.  
Note: The remote control battery normally lasts for about one year, although it  
depends on how often and for what operations the remote control is used.  
If the remote control fails to work even when it is operated near the unit,  
replace the battery.  
Install time back up batteries  
Time back up  
The clock time can be maintained during a power failure by using 2 x AAA/ LR03  
batteries (not supplied). During a power interruption, the time may go forward or  
back slightly and may require resetting.  
Battery insertion  
1. Remove the battery cover on the back of the unit by pressing on the battery  
cover catch whilst removing it.  
2. Insert 2 x AAA/ LR03 batteries (alkaline batteries are recommended) into the  
battery compartment, following the correct polarities marked inside the battery  
compartment.  
3. Replace the battery cover.  
Note: For optimum performance, the batteries should be replaced every 6  
months  
Precautions when using batteries  
1. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only  
with the same or equivalent type of battery.  
2. Ensure you follow the correct polarities when installing the batteries (see  
marks in the battery compartment). Reversed batteries may damage the  
remote control.  
3. Exhausted batteries must be removed as they may leak.  
4. Dispose of batteries properly according to environmental regulations.  
GB- 6  
 
BASIC OPERATIONS  
ON/ STANDBY mode  
After connecting the power supply (refer to previous section - CONNECTIONS),  
press the ( ) ON/STANDBY button to turn on the unit or go to standby mode.  
Navigation and number/character entry  
Using the buttons on the unit  
Turn the SCROLL/SELECT/SNOOZE knob to scroll through  
the menu and press it to enter the highlighted item. You can  
press the BACK button to return to previous menu. Press and  
hold the BACK button to return to the main menu. When  
entering numbers, e.g. a time, turn the SCROLL/SELECT/SNOOZE knob to  
adjust and press it to confirm. When entering characters, such  
as a WEP/WPA key during the Wi-Fi connection set-up, turn  
the SCROLL/SELECT/SNOOZE knob to adjust the number/  
character and press it to confirm. Use the P2/ , P4/ buttons  
to move to the previous or next number/ character. Press and  
hold down the SCROLL/SELECT/SNOOZE knob (or press the  
complete and confirm the entry.  
button) to  
Using the remote control  
This is similar to using the unit except that you will need to use the UP or  
DOWN button to scroll through the menu and adjust the item. To complete  
and confirm the entry, press the button as the “press and hold” button  
operation does not work on the remote control.  
In the main menu, you can choose: “FM Radio”, “Internet Radio”, “Media Server”,  
“USB/SD/MMC”, “Aux In” and “Settings”.  
“Settings” menu:  
Settings  
Descriptions  
Display  
Time  
Set the hour and minute of the clock time.  
“disable”: Disable the alarm function.  
“set / Set the alarm time and enable alarm  
enable”: function.  
Alarm  
Select the alarm source: “FM  
“select  
preset”, “FM tune”, “Internet radio”,  
source”:  
“USB/ SD/MMC” or “buzzer”.  
Set up the configuration to connect  
“Connection” the Wi-Fi or Ethernet, or check the  
connection status.  
System  
Upgrade the firmware via the Internet.  
“Upgrade”:  
Select the on-screen-display language.  
“Language”:  
“Reset”: Reset all settings to default values.  
GB- 7  
 
TIME set  
Set the clock  
1. Select Settings ÆTime. The clock time is displayed.  
2. Turn the SCROLL/SELECT/SNOOZE knob to adjust the  
hour and press it to confirm.  
3. Repeat the step (2) to adjust the minutes.  
Set the alarm time  
1. Select Settings ÆAlarm Æ set/enable. The alarm time will be displayed.  
2. Follow the steps (2) to (3) in “Set the clock” to set the alarm time.  
The unit allows you to choose the sound to which you would like to wake up.  
1. To enable the alarm function, select “Settings” Æ”Alarm” Æ  
“set/enable” and if necessary, set the alarm time. Press the  
SELECT button to confirm.  
2. To select the alarm source, choose “select source”: “FM  
preset”, “FM tune” (manual tuning to a local FM radio station), “Internet radio”,  
“USB/SD/MMC” and “buzzer”.  
3. When the preset alarm time is reached, the unit will switch on with the selected  
alarm source.  
4. Press the  
button to stop the alarm and it will sound again the next day at  
the same time.  
5. To disable the alarm completely, select “Settings” Æ”Alarm” Æ “disable”.  
Note: The default alarm source is the buzzer. When another source is selected  
but is not available at the alarm time, it will automatically switch to the  
buzzer alarm.  
The buzzer volume level is fixed. However the sound level can be adjusted  
for the other sources using the VOL +/- button.  
SNOOZE function  
When the alarm sounds, press the SCROLL/SELECT/SNOOZE knob to stop the  
alarm and it will sound again after 8 minutes. This alarm cycle will repeat for up  
to one hour. To cancel SNOOZE function and repeat the alarm the next day,  
press the  
button.  
GB- 8  
 
FM RADIO OPERATION  
This mode allows you to listen to local FM radio stations.  
Listen to FM radio  
1. Press the ON/STANDBY ( ) button to turn on the unit.  
2. Select FM Radio ÆTune.  
3. To search automatically, turn the SCROLL/SELECT  
/SNOOZE knob on the unit (or the UP  
or DOWN  
button on the remote control) and release to tune to a  
station.  
4. To search manually, press the SCROLL/SELECT/SNOOZE knob once to go  
to manual search mode and then turn it to search for a station. Press it again  
to return to the auto search mode.  
Achieve optimum reception  
When listening to a FM radio station, extend and position the FM antenna to  
achieve optimum reception.  
Preset FM radio stations  
You can store up to five preset stations for FM radio.  
1. Tune the radio to a desired station, then press and hold  
down the preset buttons P1 to P5 on the unit to store the  
station.  
2. Repeat step (1) to store any other desired stations.  
Note: The press and hold button operation does not work on the remote control.  
Listen to a preset FM station  
Direct entry  
In FM radio mode, press one of the preset buttons P1 to P5 to listen to the preset  
station.  
Via the “Favorites” menu  
The preset stations are stored with the favorite stations in the  
“Favorites” menu. Select the following menus: “FM Radio” Æ  
“Favorites” and select the desired preset station. Press the  
SELECT button to confirm.  
GB- 9  
 
INTERNET RADIO OPERATION  
Your unit can be connected to a wireless network (Wi-Fi) or an Ethernet. This  
allows you to enjoy the vTuner live Internet radio service.  
Note: Before operating this mode, make sure that you have read and understood  
the instructions in “PREREQUISITES FOR INTERNET RADIO” and  
CONNECTIONS”.  
Configurations setup  
Wired connection (Ethernet)  
1. Connect the unit to the broadband Internet using an RJ45  
Ethernet cable (not supplied). Refer to “CONNECTIONS”  
for more details.  
2. Select “Settings” Æ “System” Æ “Connection” Æ “Ethernet”  
Æ “DHCP” or “STATIC IP”.  
Depending on your Internet connection type, select “DHCP” or “STATIC IP” to  
enable the unit to connect to the Internet. In “DHCP” mode, an IP address is  
automatically assigned to the unit. In “STATIC IP” mode, you must check with  
your service provider to obtain the correct IP data as follows:  
“IP address” Æ “IP mask” Æ “IP gateway” Æ “DNS”  
Wi-Fi connection  
1. Use a router (not supplied) to connect the wireless access point (Wi-Fi) to the  
broadband Internet, refering to the “CONNECTIONS”  
section.  
2. Select “Settings” Æ “System” Æ “Connection” Æ “Wi-Fi”. The  
unit will scan for all available wireless networks and display  
the network names (SSID).  
3. Select the network and press the SELECT button to confirm.  
4. Select the correct encryption security system: Open network,  
WEP key or WPA.  
5. Open network: Select “DHCP” or “STATIC IP”.  
WEP key: Enter the WEP code.  
WPA key: Enter the WPA code.  
Note: After entering the WEP or WPA key, you need to select “DHCP” or  
“STATIC IP”.  
Turn the SCROLL/SELECT/SNOOZE knob to adjust the number/  
character and press it to confirm. Then use the P2/ and P4/ button to  
move to the previous or next number/ character. Press and hold down the  
SCROLL/SELECT/SNOOZE knob (or press the  
button on the remote  
control) to complete and confirm the entry.  
For both the wired (Ethernet) and Wi-Fi connection, the message “Connection  
successful” will be displayed to confirm that the internet is connected. If this is not  
the case, “Connection failed” will be displayed. You should try above steps again  
to enter correct IP data, WEP or WPA key and also make sure that the wired or  
wireless networks are available and working.  
GB-10  
 
Listening to a web radio station  
After successfully connecting to the Internet, you can enjoy the  
vTuner live internet radio service by selecting “Internet Radio”.  
The following options are available:  
Options  
Country  
Favorites  
Location  
Descriptions  
The unit can automatically detect the country in which the unit  
is located and display the web radio stations in that country.  
The “Favorites” option allows you to find your favorite stations.  
This option allows you to select a country and then select a  
web radio station in this country.  
This option allows you to choose a category: “News”,  
“Comedy”, “Dance” and “Sports”. etc.  
Format  
Select the new stations that have been added since the last update.  
New Stations  
Most Popular  
Stations  
Select the most popular stations based on web site usage.  
Podcasts By Select your favorite type of podcast such as “Arts”,  
Genre  
Podcasts By  
Location  
“Entertainment”, “Lifestyle”, “Music”, “Talk”, “TV” and “Variety”.  
Select your favorite type of podcast type by the location.  
Preset web radio stations  
You can store up to five preset stations for web radio. The procedure for storing  
web station is the same as “Preset FM radio stations” using the preset buttons  
P1 to P5.  
Listen to a preset web station  
The procedure is the same as the one described in “Listen to a preset FM  
station”. You can listen to a preset web station directly using the buttons P1 to  
P5 or by browsing through the “Favorites” menu in Internet Radio mode.  
List of favorite stations  
You can bookmark the current web radio station in a list of “Favorites”. This list is  
stored in the “Favorites” menu.  
1. When you wish to store a web radio station, press and hold  
down the SELECT button on the unit to bookmark it in the  
“Favorites” menu.  
Note: The press and hold button operation does not work on  
the remote control.  
2. To find a station stored in the “Favorites” menu, browse through the following  
menus: “Internet Radio” Æ “Favorites” and select the desired station.  
3. Press the SELECT button to confirm.  
4. To remove the bookmark for a station, press the  
/
button. Exit the  
“Favorites” and re-enter it to check that the station is not in the “Favorites” list.  
Notes: Some web radio stations do not broadcast 24 hours per day, and some are  
not always on-line.  
Unlike the FM antenna, the Wi-Fi antenna is built into the unit. To achieve  
optimum reception of the wireless connection, place the unit close to the  
wireless access point. Reception depends on your router performance and  
environmental factors.  
GB-11  
 
USB DEVICE AND SD/MMC CARD OPERATION  
This unit allows you to listen to files on a USB device or SD/MMC card. You can  
also copy files from your USB device to your SD/MMC card and vice-versa. You  
can also record web radio and FM radio to a USB device or SD/MMC card.  
Playback  
1. Insert a USB disk into the USB port  
or/and an SD/MMC  
card into the SD/MMC card slot on the front of the unit.  
2. Select “USB/SD/MMC” Æ”Playing” Æ”USB” or “SD/MMC”.  
3. Turn the SELECT button to select a folder and press it to confirm the selection.  
Then turn the SELECT button to select a file and press it to start playback.  
4. To skip to the next/ previous file, press the P2/  
, P4/  
button.  
5. To pause playback, press the P3/  
playback.  
button. Press it again to resume  
6. To stop playback, press the P5/ button.  
REPEAT and RANDOM playback  
Press the  
/
button repeatedly to select one of the following playback  
modes: Repeat one  
, Repeat folder , Random or Repeat/ Random off.  
Copy files  
1. Insert both a USB disk and an SD/MMC card into the unit.  
2. Select “USB/SD/MMC” Æ”Copy” Æ”USB” or “SD/MMC”.  
3. Select the file to you wish to copy and press the SELECT  
button to confirm.  
4. Select the destination folder and press the  
button to  
confirm. Note: If the destination device is full, copying will fail.  
Note: Ensure that the device contains at least one folder in which to place the  
copied file.  
Some external hard disks may not be supported. Hard disks that have a  
built- in power supply should be favored.  
Due to different formats, some models of USB, SD/MMC storage devices or  
MP3 players may take longer time to be read or even may not be read.  
AUX IN FUNCTION  
An AUX IN jack is provided with the cable to connect your external audio device,  
such as a MP3 player, in order to listen to the music through this unit.  
1. Plug the AUX IN cable (supplied) into the AUX IN jack. Refer  
to the “CONNECTIONS” section.  
2. In the main menu, select “Aux IN”.  
3. Operate your external audio device as usual to select and play the music.  
4. Adjust the volume controls on both your external audio device and this unit to  
the desired volume level.  
Note: In AUX IN mode, this unit display cannot show any music information (e.g.  
track no.) for your external audio device.  
GB-12  
 
RECORD FUNCTION  
You can record a web radio or FM radio broadcast on a USB device or SD/MMC  
card for private use only, or record an audio file read by an appliance connected  
via the AUX IN jack.  
Recording web and FM radio station broadcasts  
1) Insert a USB device and/ or SD/MMC card into the unit and  
listen to the desired web or FM radio station.  
2) Press the  
button and if both devices are inserted,  
select the destination device (USB or SD/MMC). Press the  
SELECT button to confirm.  
3) You can name the file you are about to create. In order to do  
so, use the SCROLL/SELECT/SNOOZE knob to choose a  
character, use the BACK button to delete a character and  
the P4 button to skip to the next character. Then press the  
or SELECT button to start recording.  
4) To stop recording, press the  
button. The file is saved.  
Instant record function  
You can also press and hold down the  
button on the unit to start recording  
immediately on the USB device with the default filename. However you cannot  
create your own file name. If no USB device is inserted, the recording will be  
recorded to the SD/MMC card.  
Note: The press and hold button operation does not work on the remote control.  
Recording with the AUX IN function  
1. Refer to “AUX IN FUNCTION” to play the  
music on an external appliance.  
2. Follow steps (2) to (4) in the “Record web  
and FM radio” section to record the music from a web or FM station  
broadcast.  
Note: If the space available on the device is not sufficient, recording will fail.  
Playing recorded files  
Refer to “USB DEVICE AND SD/MMC CARD OPERATION” to play the recorded  
files.  
MEDIA SERVER  
Step 1: Set Up Media Sharing in Windows Media Player 11  
After you download and install Windows Media Player 11 and connect your radio  
to the network, you need to set up media sharing so that you can share music  
with your radio. The following steps describe how to set up media sharing in  
Windows Media Player 11.  
1. In Windows Media Player 11, click the small arrow  
below the Library tab, and then click Media  
Sharing.  
GB-13  
 
2. In the Media Sharing dialogue box, select  
the Share my media check box.  
3. Check the “share my media to” box. In the  
list, click your Radio*, click Allow, the  
selected device will now show a green tick  
and then click OK.  
z If your device does not appear in the list of  
devices, perform the following steps;  
From the main menu of your internet radio select "Media Server". A list of  
available computers will appear. Select the required computer.  
Your device will now appear in the list. If you want to check that this is your radio,  
right click on the device and select “Properties”: your radio's MAC address will be  
shown.  
Note: Please ensure that your PC is connected to the same network as your  
internet radio.  
You can choose the folders you want to share using the Library tab.  
Step 2: Play Music on the Internet Radio.  
After installing and configuring your radio and Windows Media Player 11, you are  
now ready to play music via a wireless connection. The following steps describe  
how to play music with your radio.  
1. Select "Media Server" in the main menu.  
2. Select the computer you wish to play the music files from.  
3. Use the controls to browse according to the following criteria: All Music,  
Genre, All Artists, Contributing Artists, Album Artists, Composers, Albums,  
Playlists, Folders or Star Ratings and then press the SELECT button to  
confirm.  
4. Select the tracks you want to play, then press the SELECT button. Enjoy the  
music!  
MAINTENANCE  
Care and maintenance  
To clean the casing, unplug the unit and wipe off dust and stains with a soft cloth  
moistened with a mild soap and water solution only. Do not use benzene, thinner  
or similar chemicals.  
If at any time in the future you should need to dispose of this product,  
please note that waste electrical products should not be disposed of with  
household waste. Please recycle where facilities exist. Check with your  
local authority or retailer for recycling advice. (Waste Electrical and  
Electronic Equipment Directive)  
GB-14  
 
TROUBLE SHOOTING GUIDE  
Recommendations  
Problems  
FM Radio  
1. Noise or distorted 1.1 Extend and position the FM antenna to achieve the best reception.  
sound  
Internet Radio  
2. Does not connect 2.1 Ensure that you have configured your home network correctly by  
to the Internet  
connecting to the Internet from a PC using the same network.  
2.2 For a wired connection (Ethernet), check that the Ethernet cable is  
properly plugged in.  
2.3 Ensure that a DHCP server is available or that you have  
configured a static IP address. To configure the DHCP, you must  
read the instructions supplied with the wireless access point.  
2.4 Ensure that your wireless access point does not restrict  
connections to particular MAC addresses. The unit MAC address  
can be located by browsing through the menus: “Settings”  
Æ”System”Æ”Connection”Æ”Status”Æ”Configuration”.  
2.5 If you have an encrypted network, ensure that the correct WEP or  
WPA codes have been entered correctly.  
3. The  
Internet 3.1 The station does not broadcast 24 hours per day.  
connection  
is 3.2 The station has reached the maximum allowed number of on-line  
successful  
cannot play  
but  
a
listeners.  
3.3 The station does not broadcast anymore.  
3.4 The link on the unit is out of date.  
3.5 The Internet connection between you and the server (often located  
in a different country) is slow.  
particular station  
USB device, SD/MMC card  
USB device 4.1 Insert it the other way round.  
4.  
or SD/ MMC card  
cannot be inserted  
5. USB device or, 5.1 Some external hard disks may not be supported. Hard disks that  
SD/MMC card is  
not read  
have a built-in power supply should be favored.  
5.2 NTFS format is not supported. Check with the USB device file  
system and format it with FAT or FAT32.  
5.3 Due to different technical specifications, some models of USB  
devices, SD/MMC cards or MP3 players may not be read.  
General  
6. System hangs up  
6.1 Press the ON/STANDBY ( ) button to go to Standby mode and  
press it again to turn on the unit.  
6.2 Reset by unplugging the AC/DC adapter for few seconds and  
plugging it back in.  
or  
abnormal  
display indication  
7. No sound  
8. The  
7.1 Adjust the volume.  
7.2 Disconnect the headphones.  
remote 8.1 Move closer to the unit and point toward the IR remote control  
control does not  
sensor.  
work  
8.2 Insert the battery with the polarity (+) matching the mark on the  
bottom of the remote control.  
8.3 Replace the battery.  
8.4 The press and hold button operation works on the unit only.  
Note: Should the problem persist, please download the firmware for this Internet  
the AC/DC adapter and insert the USB device into the unit. Plug the AC/DC  
adapter back in and it will automatically upgrade the system.  
GB-15  
 
TECHNICAL SPECIFICATIONS  
Amplifier  
Output power……………………………. 6 W (2 x 3W)  
Speakers.………………………………… 3” 4 Ohm  
FM Radio  
Tuning range…………………………….. 87.5 – 108 MHz  
Number of stations that can be stored... 5  
FM antenna…………………………....... Telescopic type, external  
Internet Radio  
Wired connection……………………….. Network 10/100 RJ 45 Ethernet jack  
Wireless (Wi-Fi) connection…………… 802.11b/g with WEP/WPA encryption  
vTuner live internet radio service……… ¾ 5000 stations + 10000 podcasts  
Number of stations that can be stored... 5  
Wi-Fi antenna……………………………. Built into the unit  
Media Server/ USB device/ Card  
Compatible files…………………………. MP3, WMA, WAV  
USB port type……………………………. 2.0  
USB maximum handling capacity……... 320 GB  
Card type………………………………… SD/MMC  
Card maximum handling capacity…….. 2.0 GB  
MP3 sampling rate……………………… 32, 44, 48 kHz  
WMA sampling rate…………………….. 44, 48 kHz  
Other connections  
AUX IN jack……………………………… 3.5 mm stereo jack  
Headphones jack……………………….. 3.5 mm stereo jack  
General  
Power consumption…………………….. 12 W  
AC/DC adapter………………………….. AC 100 – 240V ~ 50Hz  
DC Output……………………………….. DC IN 12V/ 1200mA  
Remote control battery…………………. 3V lithium battery (CR2025)  
Time back-up battery…………………… 2 x AAA/LR03 (Not supplied)  
Dimension………………………………... 138 (H) x 253 (W) x 131 (D) mm  
Weight (without AC/DC adapter)…........ 1.5 Kg  
Note: Due to continuing improvements, the technical specifications are subject to  
change without notice.  
GB-16  
 

Q See Home Security System QR4174 411 User Guide
Radio Shack Radio HTX 242 User Guide
RCA CRT Television LIFE 133 User Guide
Reebok Fitness Treadmill RBTL12912 User Guide
Rival Indoor Furnishings BF250 User Guide
Rotel CD Player RCD 951 User Guide
Samsung CD Player MCD HM200 User Guide
Samsung Cell Phone SPH M800 User Guide
Sanyo Camera Lens LNS S03 User Guide
Sanyo Digital Camera VPC CG20 User Guide