Scott Clock Radio SCR120 User Guide

Clock Radio  
with Dual Alarm  
Auto Time Setting System  
(U.S. Patent No. 6,567,344)  
OWNER’S MANUAL  
SCR120  
SCR120_080206.p65  
23  
2/8/2006, 15:56  
 
Congratulations!  
And thank you for purchasing the E-Z Set Clock Radio from H. H. SCOTT.  
E-Z Set is the world’s first and only LED clock radio that will automatically set itself  
to the correct ‘Year’, ‘Month’, ‘Date’, ‘Day’, and ‘Time’ as soon as you plug it in. The  
only thing you have to do is tell the E-Z Set what time zone you are in, and the built  
in computer does everything else for you immediately. And not only the first time,  
but every time the power is interrupted as well.  
We all know how annoying it is to wake up in the morning and see the dreaded  
flashing “12:00” display on our clocks or clock radios. But with your E-Z Set Clock  
Radio the dreaded flashing “12:00” display is a thing of the past.  
The E-Z Set resets itself as soon as the power is restored and gets you up on time,  
every time.  
And if that isn’t enough, the E-Z Set computer also knows when Daylight Saving  
Time begins and ends and it will adjust itself for those changes automaticallythrough  
the year 2099! Leap Years too! And best of all, the long life lithium battery backup  
battery is already installed in your radio. You don’t have to remember to put a new  
9-volt battery in your radio every 6 months. Under normal circumstances the lithium  
battery can last for up to 5 years, and when it does need to be changed, a low  
batteryindicator will come on to let you know. The CR2430 lithium batteryis available  
almost anywhere that batteries are sold and it costs about the same as a normal  
9-volt battery.  
The E-Z Set also gives you dual alarms that can be set to go off on weekdays only,  
weekends only, or all 7 days. You can set one alarm to wake you up to buzzer  
Monday through Friday when you have to get up early, and use the second alarm  
to wake you up to soft music on Saturday and Sunday when you can sleep in.  
Someday all clocks and clock radios may be this smart. But today the technology  
is only available from H. H. SCOTT. We’re sure you’ll be happy and amazed by  
your E-Z Set Clock Radio, and that it will give you many years of enjoyment and  
dependable service.  
Once again, all of us at H. H. SCOTT thank you for your purchase.  
2
SCR120_080206.p65  
2
2/8/2006, 15:56  
 
IMPORTANT NOTES  
• Avoid installing this unit in places  
• Operate controls and switches as  
described in the manual.  
exposed to direct sunlight or close  
to heat radiating appliances such as  
electric heaters, on top of other  
stereo equipment that radiates too  
much heat, places lacking  
ventilation or dusty areas, places  
subject to constant vibration and/or  
humid or moist areas.  
• Before turning on the power, make  
certain that the power cord is  
properly installed.  
• When moving the set, be sure to  
first disconnect the AC power cord.  
FCC INFORMATION  
This equipment has been tested and found to comply with the limits for a Class B  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate radio frequencyenergy  
and, if not installed and used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which  
the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions:  
(1) This device may not cause harmful interference, and  
(2) This device must accept any interference received, including interference  
that may cause undesired operation.  
Changes or modifications not expressly approved by the party responsible for  
compliance could void the user’s authority to operate the equipment.  
3
SCR120_080206.p65  
3
2/8/2006, 15:56  
 
PREPARATION FOR USE  
UNPACKING AND SET UP  
Remove the radio from the carton and remove all packing material from the  
radio. We suggest that you save the packing material, if possible, in the unlikely  
event that your radio ever needs to be returned for service. The original carton  
and packing material is the only safe way to pack your radio to protect it from  
damage in transit.  
Remove any descriptive labels or stickers on the front or top of the cabinet.  
Do not remove any labels or stickers from the back or bottom of the cabinet.  
Note the serial number on the bottom of your radio and write this number in the  
space provided on Page 20 of this manual.  
Place your radio on a level surface such as a table, desk or shelf, convenient  
to an AC outlet, out of direct sunlight, and away from sources of excess heat,  
dirt, dust, moisture, humidity, or vibration.  
Unwind the AC power cord and extend it to its full length. The FM antenna is  
built in to this cord. It must be fully extended to provide the best FM reception.  
PROTECT YOUR FURNITURE  
This model is equipped with non-skid rubber 'feet' to prevent the product from  
moving when you operate the controls. These 'feet' are made from non-migrating  
rubber material specially formulated to avoid leaving any marks or stains on your  
furniture. However certain types of oil based furniture polishes, wood preservatives,  
or cleaning sprays may cause the rubber 'feet' to soften, and leave marks or a  
rubber residue on the furniture. To prevent any damage to your furniture we strongly  
recommend that you purchase small self-adhesive felt pads, available at hardware  
stores and home improvement centers everywhere, and apply these pads to the  
bottom of the rubber 'feet' before you place the product on fine wooden furniture.  
4
SCR120_080206.p65  
4
2/8/2006, 15:56  
 
POWER SOURCE  
This radio is designed to operate on normal 120V 60Hz AC power only. Do not  
attempt to operate the radio on any other power source. You could cause damage  
to the radio that is not covered by your warranty.  
This radio should be connected to an AC outlet that is always ‘live’. Do not connect  
it to an outlet that is controlled by a wall switch. When the power to the radio is  
interrupted, the built in lithium battery takes over to maintain the time and alarm  
settings. To maximize the life of the lithium battery keep the radio connected to a  
‘live’ AC outlet at all times.  
You will note that this system is equipped with a polarized AC power plug having  
one blade wider than the other. This is a safety feature. If this plug does not fit into  
your existing AC outlet, do not try to defeat this safety feature by filing the wide  
blade to make it fit into your outlet. If this plug will not fit into your outlet, you  
probably have an out-dated non-polarized AC outlet. You should have your outlet  
changed by a qualified licensed electrician.  
AC Outlet  
AC Plug  
5
SCR120_080206.p65  
5
2/8/2006, 15:56  
 
LOCATION OF CONTROLS AND INDICATORS  
6
SCR120_080206.p65  
6
2/8/2006, 15:56  
 
Top Panel  
1.) ALARM MODE Button.  
(Weekdays/Weekends/Everyday alarm)  
2.) TIME Setting Button.  
3.) DATE Setting Button.  
4.) ALARM 1 Setting Button.  
5.) ALARM 2 Setting Button.  
6.) TIME ZONE Button.  
7.) UP Button.  
8.) DOWN Button.  
9.) SLEEP Timer Button.  
10.)  
RADIO ON/OFF Button.  
11.) SNOOZE (SLEEP OFF) Button.  
Left Side Panel  
12.) ALARM 1 Selector Switch.  
(RAD/BUZ/OFF)  
13.) ALARM 2 Selector Switch.  
(RAD/BUZ/OFF)  
14.) Display DIMMER Switch (HI/LOW)  
Right Side Panel  
15.) VOL (Volume) Control.  
16.) Band (AM/FM) Selector Switch .  
17.) TUN (Tuning) Control.  
Front Panel  
18.) AM Indicator.  
19.) AL (Alarm) 1 ‘On’ Indicator.  
20.) Time Display.  
21.) AL (Alarm) 2 ‘On’ Indicator.  
22.) MONTH/DATE Display.  
23.) BATT. LOW Indicator.  
24.) Day Indicators.  
25.) Tuning Dial.  
Back Panel  
26.) Back Up Battery Compartment.  
27.) AC Power Cord.  
7
SCR120_080206.p65  
7
2/8/2006, 15:56  
 
OPERATING INSTRUCTIONS  
SETTING THE TIME, THE FIRST TIME  
IMPORTANT: The first time you connect your new E-Z Set clock radio to the AC  
outlet the internal computer will automatically set the time correctly for the  
Eastern Time Zone, which is the initial default setting.  
The display will scan for a few  
seconds and then set the correct  
Month, Date, Day and Time in the  
Eastern zone.  
If you live in the Eastern Time zone, there’s nothing else to do. Your clock is set  
correctly and running.  
If you do not live in the Eastern Time zone you must change the default zone  
display to your own zone. You only do this one time and the E-Z Set will remember  
the new default zone setting and will always return to that setting after a power  
interruption.  
There are 7 time zones programmed into your E-Z Set clock radio as follows:  
Zone 01  
Zone 02  
Zone 03  
Zone 04  
Zone 05  
Zone 06  
Zone 07  
Atlantic Time  
Eastern Time (Default Setting)  
Central Time  
Mountain Time  
Pacific Time  
Yukon Time  
Hawaiian Time  
To change the default time zone display, depress the TIME ZONE button.  
The word “ZONE” appears in the  
main display, and the number “2” will  
appear on the small display,  
indicating that the default zone is  
Zone 2, Eastern Time.  
Hold the TIME ZONE button and then press either the UP or DOWN buttons until  
your own time zone appears on the display, then release the buttons. The clock  
display will change to the correct time in the time zone you selected. The clock will  
always return to the correct time in the zone you selected after every power  
interruption. If you move to a different time zone, simply change the default zone  
display to the new zone and the E-Z Set will remember that setting for you.  
8
SCR120_080206.p65  
8
2/8/2006, 15:56  
 
DATE DISPLAY  
The correct month and date appear in the small display. The month and date  
are expressed numerically in the MM/DD format.  
For example, May 21st will be displayed as (5. 21). This display adjusts  
automatically for months of different lengths.  
For example, at midnight on February 28th (2. 28), the display will automatically  
change to March 1st (3. 1), unless it is a Leap Year, in which case the display  
will change to February 29th (2. 29).  
YEAR DISPLAY  
To see the correct year, depress the TIME and DATE buttons together. The  
small display changes from ‘month/date’ to ‘year’.  
When you release the TIME and DATE buttons the small display returns to  
month and date.  
DAYLIGHT SAVING AND LEAP YEAR ADJUSTMENTS  
All Daylight Saving and Leap Year adjustments are made automatically by the  
E-Z Set internal computer as follows:  
Start of Daylight Saving Time:  
At “2:00 AM” on the first Sunday in April, the clock will automatically advance  
to “3:00 AM”.  
End of Daylight Saving Time:  
At “3:00 AM” on the last Sunday in October, the clock will automatically  
reset to “2:00 AM”.  
Leap Year:  
At “12:00 Midnight” on February 28th, the calendar display will change  
to “2. 29”.  
9
SCR120_080206.p65  
9
2/8/2006, 15:56  
 
IMPORTANT DAYLIGHT SAVING TIME INFORMATION  
As a result of the new Energy Bill that was passed by Congress in August of 2005,  
Daylight Saving Time is scheduled to be extended starting in 2007. This E-Z Set  
Clock Radio has been programmed to adjust itself automatically for Daylight Saving  
Time through 2006. We have also provided instructions to allow you to change  
the Daylight Saving starting and ending dates for 2007 and beyond. You only need  
to make this adjustment once and then this clock radio will automatically adjust  
itself for the new Daylight Saving Time through the year 2099.  
The instructions for adjusting the Daylight Saving starting and ending dates will be  
found on a separate addendum sheet included with this Instruction Manual.  
10  
SCR120_080206.p65  
10  
2/8/2006, 15:56  
 
MANUAL TIME ADJUSTMENTS  
Some people like to set their clocks 5 to 10 minutes fast to make sure that they will  
always be on time. Even though the E-Z Set sets the time by itself, you still have  
the option of adjusting the time manually if you wish.  
To manually adjust the time display depress and hold the TIME button, and press  
either the UP or DOWN buttons to adjust the time display ahead or back as desired.  
Each press of the UP or DOWN buttons will change the display by one minute.  
If you hold the UP or DOWN buttons the display will continue to change. The display  
will change slowly at first, one minute at a time. But if you continue holding the UP  
or DOWN buttons the display will change rapidly.  
Note: If you manually adjust the time, your new setting is entered into the  
E-Z Set memory. If the power is interrupted, the display will return to your new  
setting, not the original setting, when the power is restored.  
ADJUSTING THE WAKE UP TIMES  
Your E-Z Set clock radio has two separate alarms that can be set and used  
independently. You may use the alarms to wake two people at different times, or  
you may use one alarm for weekdays and the other for weekend wake up times.  
The procedure for adjusting the wake up time is the same for both Alarm 1 and  
Alarm 2.  
1.) Depress and hold either the ALARM 1 or ALARM 2 setting button. The main  
display will change from the correct time to the Alarm 1 or Alarm 2 wake up  
time.  
2.) While holding the ALARM 1 or ALARM 2 setting button, depress either the UP  
or DOWN button to move the display ahead or back to your desired wake up  
time.  
3.) When the desired wake up time appears on the display, release the UP or  
DOWN buttons.  
Note: Be sure that you have set the wake up time correctly by observing  
the AM indicator. If the AM indicator is ‘On’ the wake up time is “AM”. If the  
AM indicator is ‘Off’, the wake up time is “PM”.  
4.) When the desired wake up time (AM or PM) appears on the display, release  
the ALARM 1 or ALARM 2 setting buttons.  
11  
SCR120_080206.p65  
11  
2/8/2006, 15:56  
 
SELECTING THE ALARM MODE  
Your E-Z Set clock radio allows you to select from among three different alarm  
operation modes for either alarm. The alarm modes are:  
Weekdays only - the alarm will only turn on Monday through Friday;  
Weekends only - the alarm will only turn on Saturday and Sunday;  
Everyday - the alarm will turn on all 7 days.  
To check theAlarm Mode setting for Alarm 1, depress the ALARM 1 setting button.  
The display will show the Alarm 1 wake up time and the day of the week indicators  
will show you which alarm mode is selected.  
• If all 7 indicators are ‘On’, the Everyday mode is selected.  
• If only the Monday through Friday indicators are ‘On’, the  
Weekdays only mode is selected.  
• If only the Saturday and Sunday indicators are ‘On’, the  
Weekends only mode is selected.  
To change the Alarm Mode setting for Alarm 1, hold the ALARM 1 setting button  
and press the ALARM MODE button until the day indicators show the desired  
mode setting, Weekdays only, Weekends only, or Everyday operation. Release  
the ALARM MODE and ALARM 1 setting buttons and the display will return to the  
correct time.  
Follow the same procedure to select the desired Alarm Mode for Alarm 2 if  
necessary.  
CHECKING THE WAKE UP TIMES AND ALARM MODE  
Whenever you want to check the wake up time or the alarm mode settings, simply  
press either the ALARM 1 or ALARM 2 setting buttons. The display will change  
from correct time to wake up time and the day indicators will show you which alarm  
mode is currently selected.  
Release the ALARM 1 or ALARM 2 setting buttons to return to correct time.  
12  
SCR120_080206.p65  
12  
2/8/2006, 15:56  
 
LISTENING TO THE RADIO  
1.) Set the Band selector to the desired band, AM or FM.  
2.) Set the VOL (Volume) control to a low setting.  
3.) Press the RADIO ON/OFF button to turn the radio ‘On’.  
4.) Select your desired station with the TUN (Tuning) control.  
5.) Adjust the VOL control to the desired setting.  
6.) When you are finished listening, press the RADIO ON/OFF button to turn the  
radio ‘Off’.  
ANTENNA INFORMATION  
AM -The AM bar antenna is inside the cabinet. If AM reception is weak, change the  
position of cabinet until the internal antenna picks up the strongest signal.  
FM -The FM antenna is built in to the AC power cord. If FM reception is weak try  
varying the position and direction of the power cord until you find the strongest  
signal.  
13  
SCR120_080206.p65  
13  
2/8/2006, 15:56  
 
WAKE TO RADIO  
1.) Turn the radio ‘On’ and select the band, station, and volume level that you wish  
to hear when the alarm comes on, then turn the radio ‘Off’ again.  
2.) Reconfirm the wake up time and alarm mode settings for the alarm you are  
using, Alarm 1, Alarm 2, or both alarms.  
3.) Set the ALARM selector switch for one or both alarms to the RAD (Radio)  
position. The appropriate AL 1 and/or AL 2 indicators will light up to confirm  
that the alarms are set.  
4.) At the selected wake up time the radio will turn ‘On’. It will play for one hour and  
then shut off automatically.  
5.) To stop the radio sooner, press either the appropriate ALARM 1 or ALARM 2  
button, or press the RADIO ON/OFF button. The radio will stop but the alarm  
remains set and will turn the radio on again at the same time on the following  
day (depending on the Alarm Mode setting).  
6.) If you do not want the alarm to turn the radio on the following day, set the  
appropriate ALARM selector to the “OFF” position.  
14  
SCR120_080206.p65  
14  
2/8/2006, 15:56  
 
WAKE TO BUZZER  
Note: Alarm 1 and Alarm 2 have different buzzer sounds.  
• Alarm 1 is a “Single beep” sound.  
• Alarm 2 is a “Double beep” sound.  
You will be able to tell which alarm is going off by the sound that it makes.  
1.) Reconfirm the wake up time and alarm mode settings for the alarm you are  
using, Alarm 1, Alarm 2, or both alarms.  
2.) Set the Alarm selector switch for one or both alarms to the BUZ (Buzzer)  
position. The appropriate AL 1 and/or AL 2 indicators will light up to confirm  
that the alarms are set.  
3.) At the selected wake up time the buzzer will sound. It will continue for one hour  
and then shut off automatically.  
4.) To stop the buzzer sooner, press either the appropriate ALARM 1 or ALARM 2  
button. The buzzer will stop but the alarm remains set and will turn the buzzer  
on again at the same time on the following day (depending on the Alarm Mode  
setting). To stop the buzzer and turn on the radio immediately, press the  
RADIO ON/OFF button instead of the ALARM 1 or ALARM 2 button.  
5.) If you do not want the alarm to turn the buzzer on the following day, set the  
appropriate ALARM selector to the “OFF” position.  
RADIO AND BUZZER OPERATION  
You may also set one alarm for “Wake To Radio” and the other for “Wake To Buzzer”.  
Just set the ALARM 1 and ALARM 2 selector switches to the desired positions.  
SNOOZE ALARM  
After the radio or buzzer alarm sounds in the morning you may press the SNOOZE  
Bar for a few more minutes sleep. The appropriate AL 1 or AL 2 indicator will  
‘flash’.  
The alarm will stop for approximately 9 minutes and then turn on again. You may  
repeat the Snooze operation up to seven times if desired, but after the seventh  
time the alarm will not turn on again.  
15  
SCR120_080206.p65  
15  
2/8/2006, 15:56  
 
SLEEP TO MUSIC TIMER  
You can program the sleep timer to play the radio for up to 90 minutes and then  
shut off automatically.  
1.) Press the SLEEP button.  
The small display will show “10”  
and the radio will begin to play.  
After 10 minutes the radio will  
shut off automatically.  
Each time you press the SLEEP button the sleep timer will start at 10 minutes.  
This is the sleep timer default setting.  
2.) To increase or decrease the amount of time that the radio will play before  
shutting off, hold the SLEEP button and press either the UP or DOWN button  
to change the display to the desired sleep time, up to a maximum of 90 minutes  
or a minimum of 2 minutes.  
Note: When you change the sleep timer from the 10 minute default setting  
to a different setting, the new setting becomes the default setting. Whenever  
you activate the sleep timer it will begin with your new default setting and  
count down to zero from that point.  
3.) To cancel the sleep timer before it counts down to “00” and shut the radio ‘Off’  
immediately, press the SNOOZE Bar.  
IMPORTANT: Remember that the station and volume settings you choose for  
the SLEEP TO MUSIC operation are the same settings you will hear if you set  
the alarm for WAKE TO RADIO the following morning.  
DIMMER CONTROL  
The DIMMER control was set to the HI (High) position at our factory. If you find the  
clock display is too bright in a darkened room, set the Dimmer control to the ‘LOW’  
position.  
16  
SCR120_080206.p65  
16  
2/8/2006, 15:56  
 
CHANGING THE LITHIUM BATTERY  
Like all batteries, eventually the built in lithium battery will need to be replaced. A  
number of factors, such as, the length of time between the date the radio was  
manufactured and the date you plugged it in for the first time determine the amount  
of time before replacement. During this initial storage period, the lithium battery is  
supplying power to the E-Z Set computer memory. Once you plug the radio in,  
your household outlet supplies the power, and the battery is not being used. A  
fresh lithium battery can supply power to the E-Z Set computer for at least 3 years  
even if it is never connected to an AC power supply. If your radio was connected to  
your AC supply within a few months after it was manufactured, and you experience  
only the normal, nuisance type, short duration power interruptions, your battery  
may last for up to 5 years or even longer.  
When the battery power drops below a certain level, the BATT. LOW indicator will  
‘flash’. When you see this indicator, you should change the battery as soon as it is  
convenient for you to do so. To change the battery proceed as follows:  
1.) Purchase a replacement 3V lithium battery wherever batteries are sold. The  
battery type is CR2430 or equivalent.  
2.) Remove the battery from its package so it is ready to install.  
IMPORTANT: Leave the radio power cord connected to your AC outlet.  
This will provide power to the E-Z Set computer memory while the original  
lithium battery is removed.  
3.) Use a small screwdriver to remove the two small screws securing the battery  
holder on the back cabinet.  
BE CAREFUL NOT TO LOSE THESE SMALL SCREWS!  
4.) Remove the battery holder from the cabinet. Then remove the original battery  
from the holder and insert the new battery into the holder the same way.  
5.) Slide the holder with the  
new battery back into the  
opening in the cabinet.  
6.) Replace the two screws  
that secure the battery  
holder in the cabinet, and  
confirm that the BATT.  
LOW indicator is ‘Off’.  
7.) Save these instructions.  
You’ll have to do this again  
five to eight years from  
now!  
17  
SCR120_080206.p65  
17  
2/8/2006, 15:56  
 
RESETTING THE CLOCK AFTER A TOTAL MEMORY LOSS  
If you do not change the built in lithium battery within a reasonable period of time  
after you see the BATT. LOW ‘flashing’ warning indicator, the lithium battery may  
become exhausted and will no longer be able to supply back up power to the E-Z  
Set internal computer. If the unit is disconnected from the AC outlet after the battery  
is exhausted, or if a power interruption occurs, the E-Z Set memory will be lost and  
the clock will need to be reset when the power is restored. Be sure to install a fresh  
lithium battery before you reset the clock, otherwise the clock will need to be reset  
each time the power is interrupted.  
If the lithium battery is exhausted and you experience an interruption in the AC  
power supply, the clock will reset itself to its initial default setting when the power is  
restored.  
The initial default setting is “AM 12:00, Saturday, January 1st (1. 1), 2005”.  
If you notice that the Time on your E-Z Set clock radio is completely incorrect, the  
Month/Date and Day indicators are also wrong, you probably experienced a total  
memory loss.  
To reset the clock after a total memory loss, proceed as follows:  
1.) Follow the instructions on page 17 and install a new CR2430 lithium battery in  
the battery compartment.  
2.) Connect the radio to your AC outlet and let the clock set itself.  
3.) Depress the TIME and DATE buttons together. The small display will change  
from ‘month/date’ to ‘year’.  
While holding the TIME and DATE buttons, press the UP or DOWN button to  
set the small display to the correct year, then release the buttons.  
4.) Depress the DATE button and the UP or DOWN button to set the small display  
to the correct month and date. The Day indicator will change automatically as  
you adjust the month/date settings. When the correct month and date appear  
on the display, release the buttons.  
Depress the TIME button and the UP or DOWN button to set the main display  
to the correct time. Be sure to confirm that you have set the time correctly to  
“AM” or “PM” by observing the AM indicator.  
18  
SCR120_080206.p65  
18  
2/8/2006, 15:56  
 
5.) After you set the time, reconfirm that the Day and Month/Date displays are still  
correct. Make final adjustments if necessary.  
The E-Z Set clock memory is now reset and the new lithium battery will maintain it  
for the next 5 to 8 years, depending on the number and duration of the power  
outages you experience.  
IMPORTANT NOTE:  
After resetting the clock, don’t forget to reset your wake up times, and alarm  
mode settings, and sleep timer settings as well.  
19  
SCR120_080206.p65  
19  
2/8/2006, 15:56  
 
CARE AND MAINTENANCE  
LITHIUM BATTERY PRECAUTIONS  
• Dispose of the old battery properly. Do not leave it lying around where a young  
child or pet could play with, or swallow it. If the battery is swallowed, contact a  
physician immediately.  
• Battery may explode if mistreated. Do not attempt to recharge it or disassemble  
it. Do not dispose of the old battery in a fire.  
CARE OF CABINETS  
If the cabinet becomes dusty, wipe it with a soft cloth. If the cabinet becomes  
smudged or dirty, clean it with a soft, slightly dampened cloth. Never allow water or  
any liquid to get inside the cabinet. Never use any abrasive cleaners or cleaning  
pads as these will damage the finish of your radio.  
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE  
PLEASE CALL:  
1-888-837-8370  
FOR CUSTOMER SERVICE, PLEASE WRITE TO:  
H.H. SCOTT, INC.  
Consumer Affairs Dept.,  
5101 Statesman Drive,  
Irving, TX 75063.  
The Serial Number can be found on the bottom cabinet. We suggest that you  
record the Serial Number of your unit in the space below for future reference.  
Model Number: SCR120  
Serial Number:  
20  
SCR120_080206.p65  
20  
2/8/2006, 15:56  
 
H.H. SCOTT, INC.  
CLOCK RADIO LIMITED WARRANTY  
What does this warranty cover? Any manufacturing defects in original material, including original parts and  
workmanship, under normal use and conditions.  
For how long? For a period of one (1) year from the date of original purchase in the U.S.  
What will we do? If you need service under this warranty, and you provide us with the dated proof of purchase,  
we will provide repair service at no charge for labor and parts at an authorized Depot Repair Facility, or replace  
the product in our discretion.  
How do you make your warranty claim? If it becomes necessary to repair your unit, you can obtain the name  
and mailing location of a Depot Repair Facility by dialing 1-888-837-8370. You should pack your unit in a well-  
padded heavy corrugated box, enclose your check or money order payable to the Depot Repair Facility in the  
amount of $5.00 to cover the return shipping and handling costs, and enclose a copy of your proof of purchase  
(warranty service will not be provided without a dated proof of purchase). Finally, you should ship the unit  
prepaid via UPS or parcel post (insured).  
What does your warranty not cover? Your warranty does not cover the following:  
Damage from negligence, misuse, abuse, accident, or failure to follow operating instructions.  
Use of product in a commercial application or rentals.  
Changes or repairs by anyone other than an authorized Depot Repair Facility.  
Damage because your unit is improperly connected to the equipment of other manufacturers.  
Units on which the serial number has been defaced, modified or removed.  
Damage to equipment not properly connected to the product.  
Cost incurred in shipping your unit to and from an authorized Depot Repair Facility.  
Ordinary adjustments which you can perform as outlined in the owner’s manual.  
Signal reception problems caused by external antenna or cable systems.  
Products purchased, used, serviced or damaged outside of the United States.  
What other limitations apply to your warranty?  
THIS WARRANTY IS NON-TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER  
ANDDOESNOT EXTENDTO SUBSEQUENT OWNERS OF THE PRODUCT. THIS WARRANTY IS VALID  
ONLY INTHE UNITEDSTATES OFAMERICA.ANYAPPLICABLE IMPLIEDWARRANTIES, INCLUDING  
THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD OF THE  
EXPRESSED WARRANTY AS PROVIDED ABOVE BEGINNING WITH THE DATE OF ORIGINAL  
PURCHASE AT RETAILANDNO WARRANTIES, WHETHER EXPRESSED OR IMPLIED, SHALLAPPLY  
TO THE PRODUCT THEREAFTER. WE MAKE NO WARRANTYAS TO THE FITNESS OF THE PRODUCT  
FOR ANY PARTICULAR PURPOSE OR USE.  
THE EXTENT OF OUR LIABILITY UNDER THIS LIMITED WARRANTY IS THE REPAIR OR  
REPLACEMENT PROVIDED ABOVE AND IN NO EVENT WILL OUR LIABILITY EXCEED THE  
PURCHASE PRICE PAID BY THE PURCHASER OF THE PRODUCT. UNDER NO CIRCUMSTANCES  
WILL WE BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT, INCIDENTAL, SPECIAL, OR  
CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE USE OF THIS  
PRODUCT.  
How does state law apply to your warranty?  
THIS WARRANTYGIVESYOU SPECIFIC LEGAL RIGHTS, BUTYOU MAYALSO HAVE OTHER RIGHTS  
WHICH VARY FROM STATE TO STATE. SOME STATES DO NOT ALLOW LIMITATIONS ON IMPLIED  
WARRANTIES OR EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGE,  
SO THESE RESTRICTIONS MAY NOT APPLY TO YOU.  
HH112N  
21  
SCR120_080206.p65  
21  
2/8/2006, 15:56  
 
H.H. SCOTT, INC.  
H.H. SCOTT, INC.  
Part No. 100-5093  
607-06  
Printed in China  
SCR120_080206.p65  
22  
2/8/2006, 15:56  
 

Pyramid Car Audio Power Supply PSV 300 User Guide
Radio Shack Door 61 2117 User Guide
RCA Home Theater System RTD980 User Guide
Rio Audio MP3 Player Mp3 Player Model Chiba User Guide
Runco Projector CL 510 User Guide
Samson Headphones 350 User Guide
Samsung Washer J1053 V S User Guide
Sanus Systems Indoor Furnishings EF20 User Guide
Sanus Systems TV Mount FS45 User Guide
Seagate Network Card ST3200826SCE User Guide